Rep 9 Smps - Xerox PHASER 3124 Service Manual

Repairs/Adjustments
Replacement
1. When replacing the main drive assembly,
tighten the screws in the reverse order
they are numbered.
Replacement is the reverse of the removal
procedure.
4-14

REP 9 SMPS

Parts list on PL 1
Switch off the electricity to the machine. Dis-
connect the power cord from the customer
supply while performing tasks that do not
need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the rear cover (refer to REP 1).
2. Disconnect all SMPS connectors.
Remove 5 screws, then the SMPS, Figure
1.
Replacement
Replacement is the reverse of the removal
procedure.
09/06
WARNING
Figure 1
PHASER 3124 / PHASER 3125