Jam 1 Rap - Xerox PHASER 3124 Service Manual

3 JAM 1 RAP

Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
Paper is jammed in front of or inside the fuser.
Paper is jammed in the exit roller and fuser after passing through the feed sensor actuator.
Check and Cause
1. Clear any paper jams in the machine.
2. Paper is jammed in the exit roller and the
fuser, PL 3, after passing through the feed
sensor actuator, PL 4, the feed sensor actua-
tor may be defective.
3.Paper is jammed in front of, or inside the
fuser, PL 3. The feed sensor is defective.
Note: The feed sensor is mounted on the
SMPS, PL 1.
PHASER 3124 / PHASER 3125
WARNING
Figure 2
1. Refer to clearing paper jams, GP 6.
2. Check and install new parts as necessary:
• Feed sensor actuator, PL 4
• Feed sensor
Note: The feed sensor is mounted on the
SMPS, PL 1.
2. Check and install new parts as necessary:
• Feed sensor actuator, PL 4
• Feed sensor
Note: The feed sensor is mounted on the
SMPS, PL 1.
09/06
Status Indicator RAPs
Solution
2-7