4. Remove the two screws and then remove
the two terminals.
5. Remove the five connectors.
6. Remove the ferrite core.
7. Remove the two pivot pins.
8. Remove the scanner unit (with DP).
9. Check or replace the scanner unit and refit
all the removed parts.
Y107330-8
Terminal
Connector
Connector
Connector
Connector
Terminal
Pivot pin
Service Manual
Screw
Screw
Figure 1-5-29
Figure 1-5-30
Connector
Ferrite core
Pivot pin
Scanner unit
(with DP)
1-5-23