Olivetti d-Copia 163MF Service Manual page 26

Initializing the machine and printing a report page for test.
1. Turn the power switch on. The machine will
begin to warm up after which the basic
screen is displayed.
2. Press the Menu key.
3. Press the or key to select [3. Report.]
4. Press the OK key.
5. Press the or key to select [31. Configu-
ration], [32. Menu Map] or [33. Usage
report].
6. Press the OK key.
Printing of the report will begin.
The display returns to the [3. Report]
screen.
Installing the software (printer driver and scanner driver).
Ensure the machine is plugged in and con-
nected to the PC's USB port before install-
ing software from the CD-ROM.
Required operating systems (OS) for using
the Software: Microsoft Windows 98SE/Me/
2000/XP
1. Switch on the PC and activate Windows.
NOTE: If the Welcome to the Found New
Hardware Wizard dialog box displays, select
Cancel.
2. Insert the CD-ROM (Product Library) into
the CD-ROM drive. Once the installation
program launches, the License Agreement
Notice is displayed.
NOTE: If the installation program fails to
launch, use Windows Explorer to access the
CD-ROM and double-click Setup.exe.
3. Click View License Agreement to display
and read it.
4. Click Accept to proceed.
5. Click Select Language.
6. Click the language to be used.
7. Click Install Software.
1-2-10
Exit
Service Manual
Figure 1-2-15
Figure 1-2-16
Notice
By using or installing the device drivers
And Software included on this CD-ROM,
you agree to become bound by terms
and conditions of this License Agreement.
Please open and read.
View License Agreement
Accept
Figure 1-2-17
Figure 1-2-18
Exit
Y107330-8