Remove Starter - Briggs & Stratton 272147 Repair Manual

4. Remove governor control bracket
disconnect governor link
Fig. 45
5. Disconnect fuel shut off solenoid wire and remove
ground wire.
6. Disconnect breather tube at air cleaner elbow
Fig. 46.
7. Remove intake elbow screws
8. Remove intake elbow and carburetor assembly.
9. Disconnect choke link at choke control.
Fig. 46
Page 30
and
, Fig. 45.
Fig. 47

REMOVE STARTER

,
.
Remove Flywheel
TM
Vanguard Twin-Cylinder OHV Liquid-Cooled Engine
10. Remove air cleaner elbow screws
and separate carburetor from intake elbow and air
cleaner elbow.
1. Remove two screws
48.
Fig. 48
1. Remove armatures
assembly, Fig. 49.
Section 3 - Engine Disassembly
, Fig. 47,
and starter motor, Fig.
and ground wire