Briggs & Stratton 272147 Repair Manual page 70

TM
Vanguard Twin-Cylinder OHV Liquid-Cooled Engine
Section 5 - Engine Assembly
1. Assemble air cleaner elbow and carburetor to
intake elbow with new gaskets, Fig. 164. Torque
screws to
90 in. lbs. (10.0 Nm)
Fig. 164
2. Assemble choke link to choke lever and install
carburetor and intake elbow assembly, Fig. 165.
Torque screws
3. Connect breather tube to air cleaner elbow.
4. Connect fuel shut off solenoid wire and install
ground wire.
Fig. 165
.
to .
90 in. lbs. (10.0 Nm)
5. Assemble governor link to governor control
bracket and install governor control bracket, Fig.
166. Torque screws to
Fig. 166
6. Assemble governor springs to governor control
bracket, Fig. 167.
Fig. 167
7. Assemble throttle link and spring to governor
lever, Fig. 168.
8. Then, assemble governor springs to governor
lever and assemble governor lever to governor
shaft.
.
70 in. lbs. (8.0 Nm)
Page 65