Disconnect Fuel Lines; Remove Fan Assembly - Briggs & Stratton 272147 Repair Manual

DISCONNECT FUEL LINES

1. Disconnect fuel line from pump to carburetor
fuel pump pulse line at valve cover
inlet line at fuel filter
Fig. 37

REMOVE FAN ASSEMBLY

1. Remove lower fan shroud screws
fan bracket screws at intake manifold
2. Remove fan shroud assembly.
Fig. 38
Page 28
,
, and fuel
, Fig. 37.
and upper
, Fig. 38.
TM
Vanguard Twin-Cylinder OHV Liquid-Cooled Engine
3. Remove flywheel housing
Fig. 39
4. Loosen fan belt and disconnect regulator- rectifier.
5. Remove fan, Fig. 40.
Fig. 40
Section 3 - Engine Disassembly
, Fig. 39.