Briggs & Stratton 272147 Repair Manual page 60

TM
Vanguard Twin-Cylinder OHV Liquid-Cooled Engine
Section 4 - Engine Overhaul
6. Install idle mixture screws and springs. DO NOT
tighten screws at this time, Fig. 132.
DO NOT install limiter caps at this time.
Fig. 132
7. Install main jets and pilot jets, Fig 133.
"L" or #1 cylinder is equipped with #114 main jet
or #2 cylinder is equipped with #118 main jet
pilot jets are #48.
Fig. 133
8. Assemble inlet valve to float and install float
assembly, Fig. 134.
Fig. 134
9. Install lower body gasket.
Make sure gasket does not twist or kink.
10. Assemble lower body. Make sure gasket remains
. "R"
in position, Fig. 135. Tighten screws to
. Both
(2.5 Nm)
Fig. 135
11. Install fuel shut off solenoid with washer.
a. Torque to 90 in. lbs. (10.0 Nm).
.
22 in. lbs.
Page 55