Table of Contents
Advertisement
Display Message
: Appears when the
Disc Tray is Opening.
: Appears when the
External Input is L1.
Front Panel Display
: Appears in the afternoon with the Clock Display.
PM
1
(Nothing appears in the morning.)
2 Title / track / file and Chapter mark
: Appears when indicating a Title / track / file number.
: Appears when indicating a Chapter number.
3 Current status of the unit
F
: Appears when Playback is paused.
B
: Appears when Playing an HDD, External HDD or
disc.
: Appears when the Scheduled Programming or
OTR has been set and is proceeding.
Entire
: Flashes when Scheduled Programming was not
Display
executed because of some error.
: Appears during Recording process.
Entire
: Flashes when a Recording pauses.
Display
: Appears when a disc is in this unit.
DB
: Appears during Dubbing.
HDD
: Appears when the unit is in HDD mode or
External HDD mode.
DVD
: Appears when the unit is in DVD mode.
: Appears when the
Disc Tray is closing.
: Appears when the
External Input is L2.
: Appears when another Remote Control Code is being received.
2
BS CS
1
PM
4
DR
CD
3
VCR
DB
HDD
DVD
4 Displays the following
• Elapsed Playback Time
• Current Title / Chapter / track /file number
• Recording Time / remaining Time
• Clock
• Channel number
• Remaining Time for One-Touch Timer Recording
Note(s)
• Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to
the unit.
• This unit does not have an RF modulator.
• Do not connect any devices other than the External
HDD or the USB memory stick into the USB input.
• USB memory stick can be used only for a Software Update.
(USB card reader, MP3 player, Digital camera, PC, keyboard,
mouse, etc. cannot be used.)
• When connecting an External HDD or USB memory
stick, connect it directly to the USB input. Do not use a
USB extension Cable.
• Make sure to Power-Off this unit and the External HDD
before disconnecting the External HDD.
EN
: Appears when a disc
is loaded on the Disc
Tray or checking for
a disc on the Tray.
: Appears when the
External Input is L2-S.
EN - 11
Advertisement
Table of Contents
