Magnavox MDR868H Owner's Manual page 23

• If you would like to Stop scanning, Select "Back" by
pressing [ OK ].
4
Press [ OK ] when finished.
• 'Antenna Out' screen will appear.
Antenna Out
5
Select "Old" or "Off" using [ K/ L ], then
press [ OK ].
• If set to "On", this unit will passthrough the RF
Antenna Signal when the Power is Off (Standby)
mode. Power Consumption is higher. If you connect
the RF to another device, it is recommended to set it
"On".
If set to "Off ", this device does not Passthrough the
Antenna Signal in the Power Off (Standby) mode
• 'Time Zone' screen will appear.
Time Zone
6
Select your Time zone using [ K/ L ], then
press [ OK ].
Time adjustment for each Time zone
GMT(Greenwich Mean Time ) - 4 hours
Atlantic
GMT(Greenwich Mean Time ) - 5 hours
Eastern
GMT(Greenwich Mean Time ) - 6 hours
Central
GMT(Greenwich Mean Time ) - 7 hours
Mountain
GMT(Greenwich Mean Time ) - 8 hours
Pacific
GMT(Greenwich Mean Time ) - 9 hours
Alaska
Hawaii
GMT(Greenwich Mean Time ) - 10 hours
• 'Daylight Saving Time' screen will appear.
Daylight Saving Time
7
Select "Old" or "Off" using [ K/ L ], then
press [ OK ] .
• If you Select "Old", time will move forward one hour
on the second Sunday in March and move back one
hour on the first Sunday in November.
• 'Clock Setting' screen will appear.
Clock Setting
8
Select "Auto Clock Setting" or "Manual"
using [ K/ L ], then press [ OK ]
• If you Select "Auto Clock Setting", Select a Channel for
using Auto Clock, then press [ OK ].
Auto Clock will Start.
When Auto Clock finishes, then press [ OK ].
• If you Select "Manual", enter 'Month' / 'Day' / 'Year'
/ 'Hour' / 'Minute' and Select "AM" or "PM" using
[ K/ L/ 0 / 1 ], then press [ OK ].
• 'Network Connection' screen will appear.
If your unit is "MDR865H", 'fun-Link (HDMI CEC)'
screen will appear. Move on to 'fun-Link (HDMI CEC)'
on page 25.
EN
Continued on next page.
EN - 23