Network Update; Automatic Check; Disc Update - Magnavox MDR868H Owner's Manual

Network Update

MDR868/867H
You can Update the Software via the Internet. Be sure that you
have completed the Network configuration beforehand.
2
Select "Network Update", using [ K/ L ],
then press [ OK ].
• If the latest version of the Software is found, a
confirmation message which prompts you to Update
will appear.
If no Update is available, press [ OK ] to finish.
3
Select "Yes" using [K/ L], then press [ OK ].
• Software Update will Start.
4
The unit will restart automatically twice,
then Software Update will finish.
Note(s)
• In order to Update the Software via the Internet,
you must connect the unit to the Internet and set up
necessary settings.
• For the Network setup, refer to 'Connection to the
Network' on page 18.
• For the Network Connection, refer to 'Network Settings'
on page 43.
• Software Update will not change any of the current
settings.

Automatic Check

MDR868/867H
You can set the unit to automatically check for the latest version
of Software when unit is connected to the Internet. If a later
version is found on the Internet server, you will be prompted to
Update the unit.
2
Select "Automatic Check", then press [ OK ].
3
Select "Old", then press [ OK ].
• Press [ (EXIT) ] to Exit.

Disc Update

You can Update the Software by using a disc.
Prepare a blank disc.
1
Access the URL: www.magnavox.com
download the latest Software to disc using a
PC by following the directions described on
the website.
• Use a blank disc, download on Software per disc.
Write the Software in the root directory of the disc
• For more details on how to download the Software,
please refer to the website.
2
Insert the disc and press [ DVD ].
• After loading disc, confirmation message will appear.
3
Select "Yes", then press [ OK ].
• Software Update will Start.
4
The unit will restart automatically twice,
then Software Update will finish.
Note(s)
• The available discs for Software Update are below:
– DVD-WR/-R
– CD-RW/-R
• Software Update will not change any of the current
settings.
Caution
• Please do not unplug the AC Power cord, LAN Cable,
wireless modem / Router or press [ Q (Power-ON) ] to
turn the unit into Standby mode while performing "USB
Update" or "Disc Update" or "Network Update".
EN
g , then
EN - 49