Magnavox MDR868H Owner's Manual page 46

Easy Connect Easy Connect
Select this if your Wireless Networks has a PBC button
the easiest way to set up a wireless Connection. If it fails, try "Easy
*2
Connect" again .
*1
PBC (Push Button Configuration) button may be called at
your Router's given name. Refer to the Router's Manual for
more details.
*2
If it continuously fails, then refer to the Router's Manual for
more details.
4
Select "Easy Connect" using [ K/ L ], then
press [ OK ].
Push Button Method
5
Select "Push Button Method" using [ K/ L ],
then press [ OK ]
6
Press the PBC button on your Wireless
Networks.
• Network Connection will automatically be established,
then Connection test will Start and the test result will
be Displayed.
7
Press [ OK ] to complete the Network
setup.
EN - 46
PIN Code Method
This method lets you configure the wireless Network using PIN
*1
. It is
Code method.
4
Select "PIN Code Method" using [ K/ L ],
then press [ OK ].
5
Select an access Point to which you wish to
connect this unit using [ K/ L ], then press
[ OK ]
• Confirm the 8-digit PIN Code Displayed On-screen.
6
Log on to your Wireless Networks and
enter the 8-digit PIN Code in it.
• For how to log on and set up your Wireless Networks,
please refer to its Owner's Manual.
• Network Connection will automatically be established,
then Connection test will Start and the test result will
be Displayed.
7
Press [ OK ] to complete the Network
setup.
You can check the Network Status.
1
Press [ HOME ], then Select "Settings"
"General Settings"
[ OK ].
2
Select "Displaying Network Status", then
press [ OK ].
• List of Network information will be Displayed.
• Select "Return", then press [ OK ].
• Select "Wireless"using [ K/ L ], then press [ OK ]. List
of wireless Network information will be Displayed.
Select "Address / Proxy", List of Network information
will be Displayed again.
Displaying Network Status
"Network", then press
Continued on next page.