Table of Contents
Advertisement
To Stop the Scheduled Recording in Progress
Press [ C (Stop) ] on the Remote Control.
1.
2.
Confirmation message will appear. Select "Yes", then
press [ OK ].
Checking, Deleting or Correcting the Scheduled
Programming information
1.
Press [ SCHEDULE REC. ].
2.
Check the information.
3. A:
To Delete a Scheduled Program:
1 Use [ K/ L ] to Select the Program you wish to Delete,
then press [ CLEAR ].
• Confirmation message will appear.
2 Use [ K/ L ] to Select "Yes", then press [ OK ].
3. B:
To Delete Multiple Scheduled Programs:
1 Press [ MENU ] to move to Sub Menu then Select
"Delete Multiprogram(s)" using [ K/ L ], then press
[ OK ].
2 Select the Program you wish to Delete using [ K/ L ],
then press [ OK ].
• Check Icon will appear for the Scheduled Program
Selected for Deletion.
3 Repeat step 2 until you Select all the Programs you wish
to Delete.
• To remove the Check Icon for Deletion, move the
cursor to the Selected Program and press [ OK ].
4 Press [ 1 (Cursor)] to Select [ OK ] on the screen, then
press [ OK ].
• Confirmation message will appear.
5 Select "Yes" using [ K/ L ], then press .[ OK ]
3. C:
To Correct the Scheduled Program:
1 Select the Program you wish to correct using [ K/ L ],
then press [ MENU ].
2 Select "Program Change" using [ K/ L ], then press
[ OK ].
3 Correct the Scheduled Program Information using
[ K/ L/ 0 / 1 ], then press [ OK ].
Note(s)
• With the Scheduled Recording in progress (which is shown
in red in the Scheduled Program List), you can only Edit
the End Time.
EN - 32
Skip the Scheduled Recording Period
You can deactivate the Scheduled Recording period (Daily, TUE-
SAT, MON-SAT, MON-FRI or Weekly) temporarily.
1.
Press [ SCHEDULE REC. ].
2.
Select the periodical Scheduled Recording Program you
wish to Skip using [ K/ L ], then press [ MENU ].
3.
Select "Skip" using [ K/ L ], then press [ OK ] to
Activate the Setting.
• "Skip" will appear on the left side of the Scheduled
Program, if "Skip" is Activated.
• The setting will go back to Off after the Program is
Skipped once.
If the Scheduled Program Did Not Complete Correctly,
appears in the Scheduled Programming List.
• A Program that did not complete correctly is grayed in
the Scheduled Programming List.
• To check the Scheduled Programming error message,
Select the Program that did not complete correctly and
press [ OK ].
Hints for Scheduled Recording
• If there is a Power failure or this unit has been
unplugged the Clock Setting will be lost. The Scheduled
Programming(s) will be kept. (If Manual Clock has been
Selected then you must set the Clock in order for the
saved Scheduled Recordings to be made.)
• When Recording to an External HDD, if the External
HDD is unregistered, the unit will perform Alternate
Recording to the HDD (refer to page 31).
• When Recording to a DVD, if an unrecordable disc is
inserted into this unit, the unit will perform an Alternate
Recording to the HDD (refer to page 31).
• When the Programmed Starting and Ending Time are
earlier than the current Time, the setting will not be
accepted and the Date field will be highlighted.
• If the Starting Time is earlier and the Ending Time is later
than the current Time, the Recording will Start right after
you press [ OK ] at step
• It is prohibited to change the Channel from 2 minutes
before the Programmed Starting Time.[MDR865H only]
• [ REC ] does not work from 2 minutes before the
Programmed Starting Time. If it comes to 2 minutes
before the Starting Time during basic or One-Touch
Timer Recording, the Recording in progress will be
Stopped.
9
on page 31.
Advertisement
Table of Contents
