Magnavox MDR868H Owner's Manual page 67

No image from HDMI Connection.
Home Menu cannot be called up.
TV Channels cannot be changed.
Only specific Channels do not appear.
The unit is not picking up my Channels
from the auto scan.
The image from the external device
cannot be Displayed or Recorded.
HDD EXT. HDD
Unable to Record.
HDD EXT. HDD
Scheduled Recording cannot be
performed.
HDD
The picture of the "PAUSE TV"
disappears.
DVD-RW Video DVD-R Video
Unable to Record.
DVD-RW Video DVD-R Video
"Wait for a moment." screen does not
disappear.
• Check the HDMI Connection. (Check the status of the HDMI related
indications.)
• Check the correct SOURCE or INPUT on the DTV device that has correctly
selected the Signal from this unit's HDMI output
• Check whether the connected Monitor device or other device supports
HDCP. (This unit will not output a Video signal unless the other device
supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches the
supported Input format of another connected device.
• If above remedies do not work, unplug the HDMI Cable and the AC Power
cords, then plug them back in the order of 1: HDMI Cable, 2: AC Power cord.
• Home Menus cannot be called up during DVD formatting or finalizing.
• Press [ C(Stop) ] on the Remote Control, and then press [ HOME ].
• Check if the Connections are made securely and correctly.
• Check if the Cables are damaged.
• Try Channel setting by following the steps on pages 60.
• The Channels may be set to be Skipped. (Refer to page 61)
• Check the Connections. Confirm the Main Source from the Antenna/ Basic
Cable/Cable Box/Satellite Receiver is connected to the ANTENNA IN by an
"RF Coaxial" Cable. If not using the "RF Coaxial" Cable and using an S-Video
or RCA Video/Audio Cables, the unit will need to be set on L1 or L2.
• Try pressing [ SOURCE ] repeatedly.
• Turn on all connected devices.
• Check if the Connections are made securely and correctly.
• It is prohibited to make a Recording from 2 minutes before the Programmed
Start Time of a Scheduled Recording.
• The space of the Recording media may be used up. Try Deleting unnecessary
Titles, or connect a recordable External HDD.
• The maximum number of Titles has been exceeded. Delete the unnecessary
Titles to make enough space or connect a recordable External HDD.
• Check if the Connections are made securely and correctly.
• This unit cannot Record Audio only Programs.
• The internal Clock of the unit may have been Stopped due to a Power outage.
Reset the Clock Setting. (Refer to page 59)
• The contents of "PAUSE TV" will be Cleared in some cases. (Refer to page 33)
• Check to see if the disc is formatted to this unit. If used in a PC or any other
device, it may not allow any Recordings.
• For DVD-RW, try "Format" for reformatting. (Refer to page 65)
• Copy-once Programs cannot be Recorded on DVD. This is not a malfunction.
• Check if the disc is finalized. Undo the finalization. (Refer to page 65)
• DVD-RW once formatted on another unit cannot be Recorded on this unit
unless all the contents in the disc are erased.
• Check if the Connections are made securely and correctly.
• "Wait for a moment." screen may remain On-screen for the maximum of 20
seconds even after it reached 100%. This is not a malfunction.
EN
Continued on next page.
EN - 67