Display Message; Front Panel Display - Magnavox MDR867H Owner's Manual

Display Message

: Appears when the
Disc Tray is Opening.
: Appears when the
External Input is L1.

Front Panel Display

PM : Appears in the afternoon with the Clock Display.
1
(Nothing appears in the morning.)
2 Title / track / file and Chapter mark
: Appears when indicating a Title / track / file number.
: Appears when indicating a Chapter number.
3 Current status of the unit
: Appears when Playback is paused.
F
: Appears when Playing an HDD, External HDD or
B
disc.
: Appears when the Scheduled Programming or
OTR has been set and is proceeding.
Entire : Flashes when Scheduled Programming was not
Display executed because of some error.
: Appears during Recording process.
Entire
: Flashes when a Recording pauses.
Display
: Appears when a disc is in this unit.
DB
: Appears during Dubbing.
HDD
: Appears when the unit is in HDD mode or
External HDD mode.
DVD
: Appears when the unit is in DVD mode.
: Appears when the
Disc Tray is closing.
: Appears when the
External Input is L2.
: Appears when another Remote Control Code is being received.
2
BS CS
DR
1
PM
4
4 Displays the following
• Do not touch the inner pins of the jacks on the rear panel.
• This unit does not have an RF modulator.
• Do not connect any devices other than the External
• USB memory stick can be used only for a Software Update.
• When connecting an External HDD or USB memory
• Make sure to Power-Off this unit and the External HDD
CD
3
VCR
DB HDD
DVD
• Elapsed Playback Time
• Current Title / Chapter / track /file number
• Recording Time / remaining Time
• Clock
• Channel number
• Remaining Time for One-Touch Timer Recording
Note(s)
Electrostatic discharge may cause permanent damage to
the unit.
HDD or the USB memory stick into the USB input.
(USB card reader, MP3 player, Digital camera, PC, keyboard,
mouse, etc. cannot be used.)
stick, connect it directly to the USB input. Do not use a
USB extension Cable.
before disconnecting the External HDD.
EN
: Appears when a disc
is loaded on the Disc
Tray or checking for
a disc on the Tray.
: Appears when the
External Input is L2-S.
EN - 11