• Check that the pre-treatment solution is completely dry before reloading the T-shirt on the platen.
Parent topic:
Related tasks
Adjusting the Height of the Platen
Message Is Displayed After Cleaning the Encoder Strip (Carriage Scale)
If a cleaning message is displayed on the LCD screen after you have cleaned the encoder strip (carriage
scale), make sure that no dust or ink cleaner remains on the encoder strip (carriage scale). If the
cleaning message appears on the LCD screen again, contact Epson for support.
Parent topic:
Printing Is Slow or Stops Intermittently
If printing is slow or stops in the middle of a print job, try these solutions:
• Set Head Move Direction to anything except Uni-Directional in the control panel menu list.
Solving Printing Problems
Solving Printing Problems
138