Preparing Your Printer - Epson SureColor F2000 Series User Manual

The fixing conditions vary depending on the amount of pre-treatment solution used. The following
guidelines are approximate.
Note: If the pre-treatment solution is not completely dry after the suggested amount of time, extend the
duration while carefully checking if the pre-treatment solution is dry. If traces of the pre-treatment
solution are still visible, try using water to wash them off.
Application area size
Letter/A4 and smaller
Larger than letter/A4
Note: Optimum conditions may vary depending on the type of heat press used; make sure to test in
advance to determine the correct conditions for your heat press.
Parent topic:

Preparing Your Printer

Before transmitting print data from the Garment Creator software, check the printer's status and make
sure that the print head nozzles are not clogged.
1. Turn on the printer.
Temperature
338 °F (170 °C)
Pre-treating a T-shirt
Time
45 seconds
45–90 seconds
35
Pressure
6 Psi