Print Head Moves But Nothing Prints; Platen Height Error Is Displayed While Printing - Epson SureColor F2000 Series User Manual

• Try connecting your printer to a different port or a different router, access point, switch, or hub.
• Try connecting with a different Ethernet cable.
• Try printing to your printer from another computer on the network.
Parent topic:

Print Head Moves But Nothing Prints

If the print head is moving and nothing prints, try these solutions:
• Adjust the height of the platen.
• Clean the suction cap and perform a medium level cleaning on all nozzles; watch the waste ink tube to
make sure that ink is flowing during the cleaning process.
• Print a nozzle check pattern. If the pattern does not print, clean the print head again.
Parent topic:
Related tasks
Adjusting the Height of the Platen
Cleaning the Suction Cap
Performing a Nozzle Check

Platen Height Error Is Displayed While Printing

If a platen height error is displayed on the LCD screen during printing, try these solutions:
• If the image you are printing requires a large amount of ink, the platen height position sensor may
cause an error to appear on the LCD screen. If this occurs, remove the T-shirt from the platen surface
and place it on the platen as shown here.
Solving Printing Problems
Solving Printing Problems
137