Pre-Treating A T-Shirt With A Sprayer - Epson SureColor F2000 Series User Manual

4. Apply the solution evenly in both directions as shown to an area larger than the target print area. It's
important to finish in the shoulder-to-shoulder direction; this aligns the fabric fibers to the direction of
the print head movement.
5. Fix the pre-treatment solution with a heat press, if necessary.
Note: The T-shirt fibers must be pressed flat to produce even whiteness. Even if you use a heat
tunnel to fix the ink, use a heat press to fix the pre-treatment solution before printing.
Parent topic:
Related references
Fixing the Pre-treatment Solution (Heat Press)
Related tasks
Diluting the Pre-treatment Solution

Pre-treating a T-shirt with a Sprayer

Caution: Applying the pre-treatment solution with a sprayer creates a mist. Wear a mask, protective
eye-wear, and gloves, and make sure your work area is well-ventilated.
1. Pour the diluted pre-treatment solution into the sprayer.
2. Place the T-shirt on a flat surface.
Pre-treating a T-shirt
33