Pre-Treating A T-Shirt With A Roller - Epson SureColor F2000 Series User Manual

Apply the diluted pre-treatment solution to the T-shirt with a roller or spray method according to these
guidelines.
When fixing ink with a heat press
Printed area size
Letter/A4 and smaller
Larger than letter/A4
When fixing ink with a heat tunnel
Printed area size
All sizes
Note: If fixing the ink with a heat tunnel, you need to use a heat press to fix the pre-treatment solution.
Parent topic:
Related references
Fixing the Pre-treatment Solution (Heat Press)
Related tasks

Pre-treating a T-shirt with a Roller

Pre-treating a T-shirt with a Sprayer
Pre-treating a T-shirt with a Roller
To prevent colored T-shirt fibers on the roller from sticking to other T-shirts, use a different roller for each
color.
1. Fill the tray with diluted pre-treatment solution and dip the roller in it.
2. Spread out the T-shirt on a flat surface.
3. Squeeze the pre-treatment solution out of the roller by pressing it against the edge of the tray.
Pre-treating a T-shirt
Amount of diluted solution to apply
Apply 0.0054 to 0.0073 ounce/sq. inch (0.16 to
0.21 g/sq. inch) per letter/A4 area
Apply 0.0054 ounce/sq. inch (0.16 g/sq. inch) per
letter/A4 area
Amount of diluted solution to apply
Apply 0.0054 ounce/sq. inch (0.16 g/sq. inch) per
letter/A4 area
32