Shaking And Replacing The Ink Cartridges - Epson SureColor F2000 Series User Manual

13. When the message on the LCD screen tells you to open the cartridge cover, follow the instructions
on the screen to replace the cleaning cartridge with the ink cartridge.
Note: Make sure to shake the ink cartridge before you insert it into its slot.
14. When ink recharging is complete, the LCD screen returns to Standby mode.
Parent topic:
Related tasks

Shaking and Replacing the Ink Cartridges

Shaking and Replacing the Ink Cartridges
The printer's ink cartridges, especially the White ink, can build up sediment, causing the print quality to
decline and the printer to possibly malfunction. When ink runs out, you need to replace the ink cartridge.
In both cases, you need to remove the ink cartridges from the printer.
To maintain print quality, you must do the following:
• Shake the White ink cartridges at the start of every working day
• Shake the color ink cartridges at least once a month.
If an ink cartridge runs out during printing, you can continue printing after replacing the ink cartridge.
However, the tone of the print results may differ depending on the drying conditions.
Caution: For best results, always use genuine Epson ink cartridges. Epson cannot guarantee the quality
or reliability of non-genuine ink. The use of non-genuine ink may cause damage that is not covered by
Epson's warranties and, under certain circumstances, may cause erratic printer behavior. Information
about non-genuine ink levels may not be displayed, and use of non-genuine ink is recorded for possible
use in service support.
1. Turn on the printer.
Maintenance
100