5.2.4 Wireless Access Control
The function of access control is to allow or deny users to access 3.5G server router by according MAC
address, it is optional. If you select Allowed Listed, then only those clients whose MAC address is
listed on access control can connect to your base station. If you select Deny Listed, those clients
whose MAC address is listed on access control can't connect to your base station.
Take the wireless card as the example.
(1) We will use Deny Listed as an example. Please select Deny Listed in Wireless Access Control
Mode first, and then input the MAC address of wireless card in MAC Address field. Click Apply
Changes to save the setting data.
86
Users can enable or
disable this function.