CNET CWR-935M User Manual page 222

*The following figure is the display of the front of CWR-935M.
When users select a specific model on wireless base station, the clients can connect to the base by
selecting the same model.
The connection procedures of PIN and PBC are almost the same. The small difference between
those two is:
Users input the PIN of wireless card in the base station first; it will limit the range of the clients. It is
faster to establish a connection on PIN model.
On PBC model, users push the WPS button to activate the function, and then the wireless client must
push the WPS button in 2 mins to enter the network. The client will search to see if there is any
wireless base station which supports WPS is activating. If the client finds a matching base, the
connection will be established. The speed of establishing a connection is slower than the PIN model
because of this extra step.
On the other hand, users need to input the information of the wireless card into the register interface.
It might lead to the failure of connection, if users make mistakes on inputting. On PBC model, users
only need to click the WPS button on both sides to make a connection. It is easier to operate.
This page supports Start PBC and Start PIN; please follow the instructions to operate.
* Start PBC:
222