Item
Enable Port Forwarding
IP Address
Protocol
Port Range
Comment
Apply Change & Reset
Current
Port
Forwarding
Table
Delete Selected & Delete All
Reset
*The following figure shows the IP forwarding configuration of your web on a local area network. The
web server is located on 192.168.1.100, forwarding port is 80, and type is TCP+UDP.
Configuration:
Private IP: 192.168.1.100
Port: 80 - 80
Type: TCP+UDP
Please select to enable Port Forwarding service or not.
Please specify the IP address which receives the incoming packets.
Please select the protocol type.
Please enter the port number, for example 80-80 or 20-22
You can add comments for this port forwarding rule.
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
It will display all port forwarding regulation you made.
Click Delete Selected will delete the selected item. Click Delete All
will delete all items in this table.
You can click Reset to cancel.
104
Description