Mac Filtering - CNET CWR-935M User Manual

Item
Enable IP Filtering
Local IP Address
Protocol
Comment
Apply Change & Reset
Current Filter Table
Delete Selected & Delete All
Rest

5.4.3 MAC Filtering

This function can limit a specific MAC address to access the Internet. The network card, whose MAC
address is listed on filter table, will be denied the access request by router.
Item
Enable MAC Filtering
MAC Address
Comment
Apply Change & Reset
Please select Enable IP Filtering to filter IP addresses.
Please enter the IP address that needs to be filtered.
Please select the protocol type of the IP address.
You can add comments for this regulation.
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
It will display all ports that are filtering now.
Click Delete Selected will delete the selected item. Click Delete All
will delete all items in this table.
You can click Reset to cancel.
Please select Enable MAC Filtering to filter MAC addresses
Please enter the MAC address that needs to be filtered.
You can add comments for this regulation.
Click on Apply Changes to save the setting data. Or you may click on
109
Description
Description