CNET CWR-935M User Manual page 213

Control Sideband
Broadcast SSID
Data Rate
Associated Clients
Enable MAC Clone (Single
Ethernet Client)
Enable Universal Repeater
Mode (Action as AP and
Client simultaneously)
SSID of Extended Interface
Apply Changes & Reset
Note.
1. Enable Universal Repeater Mode (Acting as AP and Client simultaneously)
Allow to equip with the wireless way conjunction upper level, provide the bottom layer user link in
wireless and wired way in the meantime. (The IP that bottom layer obtains is from upper level.)
Ex: When users enable the Universal Repeater to connect to the upper level device, please input
the channel and SSID of the upper level device on router's GUI. Click on Apply Changes to save
the settings. (The DHCP in IP config needs to be disabled.)
Enable this function will control your router use lower or upper channel.
User may choose to enable Broadcast SSID or not.
Please select the data transmission rate.
Check the AP connectors and the Wireless connecting status.
Clone the MAC address for ISP to identify.
Allow to equip with the wireless way conjunction upper level, provide
the bottom layer user link in wireless and wired way in the meantime.
(Please check Note 1).
While linking the upper level device in wireless way, you can set SSID
to give the bottom layer user search.
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
213