Lan Interface Setup - CNET CWR-935M User Manual

7.1.2 LAN Interface Setup

This page is used to configure for local area network which connects to the LAN port of your Access
Point. Here users may change the setting for IP address, Subnet Mask, DHCP, etc.
Item
Device Name
IP Address
Subnet Mask
Default Gateway
DHCP
DHCP Client Range
802.1d Spanning Tree
The name of device
The default IP address is 192.168.1.254 (recommend).
Please enter the Subnet Mask address; it should be 255.255.255.0 for
the most time.
Please enter the Default Gateway address. If you don't know the
address, please contact your ISP.
Users can choose to enable DHCP service or not. The DHCP server
will give an unused IP address to a computer which is requesting for
one. That computer must be a DHCP client, and then it can obtain an
IP address automatically.
The default value is 192.168.1.100 - 192.168.1.200. The DHCP server
will assign an IP to a computer from this range. The Show Client will
display every assigned IP address, MAC address, and expired time.
IEEE 802.1d Spanning Tree Protocol (STP) is a link layer network
protocol that ensures a loop-free topology for any bridged LAN, This
function is optional.
210
Description