CNET CWR-935M User Manual page 274


If the WEP of wireless router is enabled, your computer also needs to activate WP. The key
from both sides should match, too.

It might be interrupted by other radio frequency. Please check the status when close to the
wireless router. Bad communication environment is like 100 feet of normal situation.
3. Q: The speed of wireless connection is very slow.
A: For the best connecting speed, you can try to:

Location: Please adjust the location and direction of your router.

Channel: Change to another channel can avoid the interruption.

Interruption: It might be interrupted by other devices. You can turn off other devices first, and
then reconnect. Any noisy device should be avoided or relocated.

Shielding Effect: The speed might be impeded by your environment between wireless clients.
Close to station is the only way to improve the speed.
4. Q: When I use the wireless router, there are some applications not functioned properly.
A: You may activate DMZ service to run these applications, but be aware of following issues.

It may cause security problem if the firewall is disabled.

Only one computer can use DMZ service.
5. Q: I can't make a connection with the wireless router.
A: Check out the following:

Check out the installation of router, the connection of local area network, and the power.

Make sure your computer is located on the same network class with wireless router.

If your computer is set to Obtain an IP Address automatically（DHCP client）, please reboot
it.

If your computer uses the static IP address, please confirm the IP address is located between
192.168.1.129 ~ 192.168.1.253. The default IP address for wireless router is 192.168.1.254.
The Subnet Mask is 255.255.255.0.
274