CNET CWR-935M User Manual page 215

Item
Fragment Threshold
RTS Threshold
Beacon Interval
Preamble Type
IAPP
Protection
Aggregation
Short GI
RF Output Power
Apply Changes & Reset
To identify the maxima length of packet, the over length packet will be
fragmentized. The allowed range is 256-2346, and default length is
2346 Bytes.
This value should remain at its default setting of 2347. The range is
0~2347. Should you encounter inconsistent data flow, only minor
modifications are recommended. If a network packet is smaller than
the present RTS threshold size, the RTS/CTS mechanism will not be
enabled. The router sends Request to Send (RTS) frames to a
particular receiving station and negotiates the sending of a data frame.
After receiving an RTS, the wireless station responds with a Clear to
Send (CTS) frame to acknowledge the right to begin transmission. Fill
the range from 0 to 2347 into this blank.
Beacons are packets sent by an access point to synchronize a wireless
network. Specify a beacon interval value. The allowed setting range is
20-1024 ms.
Preamble is the first subfield of PPDU, which is the appropriate frame
format form transmission to PHY (Physical layer). There are two
options, Short Preamble and Long Preamble. The Short Preamble
option improves throughput performance. Select the suit Preamble as
Short or Long Preamble.
Inter Access Point Protocol. Allow seamless roaming between Access
Points in your wireless network.
Please select to enable wireless protection or not.
Enable this function will combine several packets to one and transmit
it. It can reduce the problem when mass packets are transmitting.
Users can get better wireless transmission efficiency when they enable
this function.
Users can adjust the RF output power to get the best wireless
connection. Users can choose from 100%, 70%, 50%, 35%, and 15%.
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
215
Description