Step 4: Presetting Radio Stations - Sony MHC-NX300AV Operating Instructions Manual

Step 4: Presetting
radio stations
You can preset the following number of
stations:
– 2 band model: 20 for FM, 10 for AM.
– 3 band model: 20 for FM, 10 for MW, and
10 for SW.
?/1
(Power)
Jog dial
– +
0 )
l >
4
2
1 3
– +
1
Press TUNER BAND repeatedly
until the band you want appears in
the display.
The bands you can receive vary
depending on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press the button, the
band changes as follows:
2 band model:
FM y AM
3 band model:
FM t MW t SW
2
Press and hold + or – until the
frequency indication starts to
change, then release.
Scanning stops automatically when a
station is tuned in. "TUNED" and
"STEREO" (for a stereo programme)
appear.
3
Press TUNER MEMORY.
A preset number flashes in the display.
The stations are stored from preset
number 1.
4
Press ENTER.
The station is stored.
5
Repeat steps 1 through 4 to store
other stations.
TUNED
STEREO
M H z
Preset number
TUNED
STEREO
continued
11