Sony MHC-NX300AV Operating Instructions Manual page 34

Locating a specific part of a disc
(continued)
Locating a section within
a track
–– Track Digest
You can have the CD player divide a SUPER
VIDEO CD/VIDEO CD track into either 9 or
12 different sections and display the first
scene of each section on the TV screen. This
might be useful when playing discs with few
track divisions, such as movies.
This function can only be used during
playback of SUPER VIDEO CDs/VIDEO CDs
without PBC functions.
1
Start playing the SUPER VIDEO
CD/VIDEO CD track you want.
2
Press SPECIAL MENU.
3
Press 4 to select "4) TRACK
DIGEST."
The current track is divided into 9
sections (in default setting) and the first
frame of each section is displayed.
The sound of the first three seconds of
each track on an audio CD plays, but
there is no sound when using a SUPER
VIDEO CD/VIDEO CD.
Current track number
TRACK 1 DIGEST
4
Press the numeric buttons (1–10/0)
to select the section you want.
Playback starts from a point near the
selected frame.
To stop playback
Press x.
34
1
2 3
4 5 6
7 8 9
To switch to a 12 frame display
You can switch the digest display from 9 to 12
frames.
1 Press SPECIAL MENU.
2 Press 5.
3 Proceed with steps 2 and 3 of "Locating a
section within a track". The track is divided
into 12 sections and the first frame of each
section is displayed.
To switch back to the 9 frame display, repeat
this operation.
To switch to the digest of another
track during Track Digest
Press PREV or NEXT during Track Digest;
however, this does not work during Shuffle
Play or Program Play.
Tip
In step 3, you can select sections even if they have
not been displayed yet.
Use the numeric buttons to select the track you
want.
Note
Tracks less than 40 seconds long may be divided
into fewer than 12 sections.