Sony MHC-NX300AV Operating Instructions Manual page 14

Playing a SUPER VIDEO CD/
VIDEO CD (continued)
3
Press one of the DISC 1~5 buttons.
The disc tray closes and playback starts.
If you press H (or CD N on the
remote), playback starts from the CD
loaded on the tray whose button is lit
green.
Disc tray number
1
* "--.--" may appear in the case of SUPER
VIDEO CD.
To
Stop playback
Pause
Select a track or Press NEXT to go forward,
scene
Find a point in a Press m or M during
track or scene
(Lock Search
function)
14
Playing time*
Track number
Do this
Press s (or x on the remote).
Press S (or X on the remote)*
Press again to resume
playback.
PREV to go back.
Or, during playback or pause,
turn the jog dial clockwise (to
go forward) or
counterclockwise (to go back)
and release it when you reach
the desired track. (Or press
> (to go forward) or .
(to go back) on the remote.)*
playback.
1 Press once to start searching.
2 Press again to increase the
search speed. Each time
you press the button, the
speed changes as follows:
1 (slow) t 2 (normal) t
3 (high) t 1 (slow) ...
3 Press H (or CD N on
the remote) to stop
searching at the desired
point.
To
Select a disc
in stop mode
Play only the
disc you have
selected
Play all discs
Remove the disc Press A.
Change other
discs while
playing
Adjust the
volume
1
* There may be some disturbance in the video
image.
* 2 Only for SUPER VIDEO CDs/VIDEO CDs
1
.
without PBC functions.
Tips
• Pressing H when the power is off automatically
turns the power on and starts SUPER VIDEO CD/
VIDEO CD playback if there is a SUPER VIDEO
CD/VIDEO CD in the tray (One Touch Play).
• You can switch from another source to the SUPER
VIDEO CD/VIDEO CD player and start playing a
SUPER VIDEO CD/VIDEO CD just by pressing
H or the DISC 1~5 buttons (Automatic Source
Selection).
2
• If there is no SUPER VIDEO CD/VIDEO CD in
the player, "CD NO DISC" appears in the display.
• When a disc tray holding a SUPER VIDEO CD/
VIDEO CD is selected (or playing), the DISC 1~5
button for that tray lights green.
Notes
• Do not use force to close the disc tray, as this may
cause CD player trouble. Always close the tray by
pressing the appropriate CD 1~5 A.
• You cannot fast-forward or rewind a still picture.
Do this
Press a DISC 1~5 button
(or D.SKIP on the remote).
Press PLAY MODE
repeatedly until "1 DISC"
appears.
Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Press one of the CD 1~5 A
buttons to open the tray that
contains the disc that
you want to change. When
you change the disc, press the
same button to close the tray.
While the tray is open, the
DISC 1~5 button indicator for
that tray flashes orange.
Turn VOLUME (or press VOL
+/– on the remote).