Sony MHC-NX300AV Operating Instructions Manual page 30

Using the on-screen display
(continued)
ON SCREEN 2 display
• During playback of a SUPER VIDEO CD/
VIDEO CD
1
DISC 1 - 7
1 Current disc and track number*
2 Elapsed time of current track
* "SCENE" and number is displayed during
playback of a SUPER VIDEO CD/VIDEO
CD with PBC functions
• During playback of an audio CD
Display is the same as ON SCREEN 1.
• During stop mode of a SUPER VIDEO CD/
VIDEO CD (except Program Play mode)
1
RESUME
2
DISC 1
3
STEREO 1
SHUFFLE
4
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
1 "RESUME" or no display
2 Current disc number
3 Current LANGUAGE mode*
4 Play mode**
5 Current disc type (SUPER VIDEO
CD or VIDEO CD)
6 Total playing time of current disc
7 Current SUBTITLE mode*
8 REPEAT mode (REPEAT, REPEAT 1,
or no display)
9 Key control level
q; Total track numbers of each disc
* For SUPER VIDEO CD only.
** "AUTO PBC" display for a SUPER VIDEO
CD/VIDEO CD with PBC functions.
30
0 : 55
STOP
SUPER VCD
30 : 00
SUBTITLE 1
REPEAT
1
SUPER VCD TRK 1 - 9
Video CD TRK 1 - 16
TRK 1 - 10
CD
TRK 1 - 15
CD
TRK 1 - 6
SUPER VCD
• During stop mode of an audio CD
(except Program Play mode)
1
2
3
2
1 Current disc number
2 Play mode
3 Disc number and track numbers
4 Total playing time of current disc
5 REPEAT mode (REPEAT, REPEAT 1,
or no display)
6 Key control level
• During stop mode of a SUPER VIDEO CD/
VIDEO CD or audio CD in Program Play
mode
Display is the same as ON SCREEN 1.
ON SCREEN OFF
No display (except for special menus).
5
Notes
6
• Normally, leave the display mode set to either
7
8
ON SCREEN 1 or 2. When you select ON
9
SCREEN OFF, you cannot check the operating
status while operating the CD player. In this case,
!º
check the information on the front panel display.
• When you record video signals played back from
this system onto a video tape (etc.), be sure to
select ON SCREEN OFF. Otherwise, the display
information will also be recorded on the video
tape.
To switch the language of the
on-screen display (Chinese model
only)
You can switch the messages in the on–screen
display from Chinese to English.
1 Press SPECIAL MENU.
2 Press 6.
The messages switch from Chinese to
English.
To switch back to the Chinese messages,
repeat this operation.
CD
DISC 3 60 : 00
CONTINUE REPEAT
1
DISC 1
SUPER VCD TRK 1 -
TRK 1 - 16
DISC 2 Video CD
DISC 3 TRK 1 - 10
CD
TRK 1 - 15
CD
DISC 4
TRK 1 -
DISC 5 SUPER VCD
STOP
4
5
6
9
6