Table of Contents
Advertisement
REC FUNCTION
Items/
Data Saved
ON: Uses internal memory to perform
interval recording.
Performs "one-shot" recording for the
duration specified under REC TIME,
and then stops.
This item cannot be changed when "ON"
is selected for the LOOP REC MODE
item or for the ONE CLIP REC MODE
item.
In addition, this does not work in Native
mode or in 24P and 24PA modes.
Selects whether INTERVAL REC MODE
settings are retained or not when the
power is turned off once.
However, the settings can be made frame
by frame, and the numbers of the cut-off
unit frames for the shortest time period
and the set time on the actual operation
may vary with the recording method. For
details, refer to [Interval Recording] (page
39).
may vary with the recording method. For
details, refer to [Interval Recording] (page
39).
Select whether or not to enable PRE-
RECORDING.
ON: PRE-RECORDING enabled.
OFF: PRE-RECORDING disabled.
Specify the PRE-RECORDING time by
using the menu option PRE REC TIME.
– C U F –
Menu: Menu Description Tables
Remarks
actual operation
.
Items/
Data Saved
Set PRE RECORDING.
Set the length of time that can be
retrospectively recorded before the
REC button is pressed.
When the SYSTEM MODE menu option
on the SYSTEM MODE screen is set to
1080-59.94i or 1080-50i, or when it is set
to 480-59.94i or 576-50i and the REC
FORMAT menu option is set to
DVCPRO50, the upper limit of the above
recording time is 8 seconds.
– C U F –
This setting can be used with PRE-
RECORDING features.
ON: Enable LOOP REC.
OFF: Disable LOOP REC.
After the power is turned off, this item
will default to OFF the next time the
power is turned on.
This item cannot be changed in the
following cases.
When "ON" or "ONE SHOT" is
selected for the INTERVAL REC
MODE item
When "ON" is selected for the ONE
CLIP REC MODE item
This does not work in Native mode or
in 24P and 24PA modes.
– – – F –
Select operating modes that allow
recording to start.
ALL: Allow recording to start during stop,
recording pause, and playback.
NORMAL:
Allow recording to start during stop
and recording pause.
Even if this is set to "ALL", the operation
is "NORMAL", when "ON" or "ONE
SHOT" is selected in INTERVAL REC
– C U F –
MODE.
Select the recording order of the slot
when the power is turned on.
HOLD:
The recording order starts with the
card previously selected when the
power was turned off.
SLOT1:
The recording order starts with the
card that is inserted in Slot 1 when the
– C U F –
power is turned on.
Displayed REC TIME, PAUSE TIME and TOTAL REC TIME are
translated into either drop-frame or non-drop-frame according
to the mode of operation.
TAKE TOTAL TIME is actual time. Therefore, TOTAL REC TIME
may incorporate fractions, depending on the settings.
Remarks
Advertisement
Table of Contents
