Table of Contents
Advertisement
Items/
Data Saved
Select the ONE CLIP REC mode.
Operate in ONE CLIP REC mode.
Do not operate in ONE CLIP REC
mode.
This item cannot be changed in the
following cases.
When "ON" or "ONE SHOT" is selected
for the INTERVAL REC MODE item.
When "ON" is selected for the LOOP
REC MODE item.
– C U F –
OUTPUT SEL
Items/
Data Saved
Set the character contents superimposed
onto the output signals for the SDI OUT
connector and MON OUT connector.
MENU ONLY:
Displays only when the menu
characters are superimposed. No
display appears when other characters
are superimposed.
TC: Display the time code. (Displays the
menu when menu characters are
superimposed.)
The TC display position moves up
and down depending on the camera
ID position.
STATUS:
Display the same characters
superimposed on the viewfinder
signal. (Displays the menu when menu
– C U F –
characters are superimposed.)
Select the output signal for the SDI OUT
connector.
MEM: in playback mode, this is the
playback image.
CAM: always the camera image.
This item is effective if "CAM" is set for
the REC SIGNAL item in the <SYSTEM
MODE> screen. If "SDI", then in playback
mode, this will be the playback video
regardless of this setting.
– C U F –
Select whether to superimpose
characters on the image output from the
SDI OUT connector.
OFF: Do not superimpose.
ON: Superimpose.
The content of the superimposed
characters is the same as that
superimposed on video output from the
MON OUT connector
– C U F –
Select the output signal format for the
MON OUT connector.
HD SDI:output an HD SDI signal.
SD SDI:output an SD SDI signal.
VBS:
Settings values for HD and SD are stored
separately.
– C U F –
Remarks
Remarks
output a composite signal.
Items/
Data Saved
Select the output signal for the MON OUT
connector. This operates separately from
SDI OUT.
MEM: in playback mode, this is the
CAM: always the camera image.
This item is effective if "CAM" is set for
the REC SIGNAL item in the <SYSTEM
MODE> screen. If "SDI", then in playback
mode, this will be the playback video
regardless of this setting.
– C U F –
Select whether to superimpose
characters on the video displayed on the
LCD monitor or in the viewfinder.
VF-OFF:
LCD-OFF: do not superimpose on the
ON:
– C U F –
Select the viewfinder image.
MEM: in playback mode, this is the
CAM: always the camera image.
This item is effective if "CAM" is set for
the REC SIGNAL item in the <SYSTEM
MODE> screen. If "SDI", then in playback
mode, this will be the playback video
regardless of this setting.
– C U F –
Select whether or not to output clip
thumbnails displayed on the LCD monitor
to the SDI OUT and MON OUT
connector.
ON: Enable output.
OFF: Disable output.
HD SDI signals are being output,
thumbnails are not output.
– C U F –
SDI OUT MARKER
Items/
Data Saved
Switches the marker on and off.
OFF:
ON:
– C U F R
Switch the center mark.
OFF: Do not display center mark.
1:
+ (large)
2:
Hollow (large)
3:
+ (small)
4:
Hollow (small)
– C U F R
Menu: Menu Description Tables
Remarks
playback image.
do not superimpose in the
viewfinder, instead
superimpose on the LCD
monitor.
LCD monitor, instead
superimpose in the
viewfinder.
superimpose in both the
viewfinder, and on the LCD
monitor.
playback image.
Remarks
The characters are not
superimposed.
The characters are
superimposed.
Advertisement
Table of Contents
