Table of Contents
Advertisement
An HD viewfinder can be used with this unit. It is recommended to use the optional AJ-HVF21KG or AJ-CVF100G (59.94/50
Hz switching).
Video seen through
Mode
Video from camera
Playback
HD
Return video (HD-Y)
HD-SDI input (HD)
Video from camera
Playback
SD
Return video (VBS)
HD-SDI input (SD
Each viewfinder shows return signals and SDI input signals in the recording formats assigned to the camera-recorder.
*1 HD Signals.
*2 The image in the viewfinder is disrupted momentarily when the SYSTEM MODE menu item is set to “480/59.94i” or “576/50i”, and the
image is switched between the camera image and playback image, but this is not a malfunction. The SYSTEM MODE menu option can
be selected from the <SYSTEM MODE> screen on the SYSTEM SETTING page.
*3 Image may be disrupted in a vertical direction when the return video image of the SDI input signal is displayed on the viewfinder with the
SYSTEM MODE menu option set to “480-59.94i” or “576-50i” and the GENLOCK menu item set to “INT”. This is not a malfunction, but
the disruption can be cleared by selecting “SDI IN” in the GENLOCK menu option. The GENLOCK menu option can be selected from the
<GENLOCK> screen on the SYSTEM SETTING page.
For details, please refer to the operating instructions for each viewfinder.
AJ-HVF21KG
Viewfinder (optional accessory)
During recording or playback, the viewfinder displays
the video image in monochrome. It also displays
warnings, messages, zebra patterns, markers (safety
zone and center markers), etc.
ZEBRA (zebra pattern) switch
This switch is used to display the zebra pattern in the
viewfinder.
ON:
Zebra pattern displayed.
OFF: No zebra pattern displayed.
TALLY switch
Used to control the 7.Front tally lamp.
HIGH: Front tally lamp brightly illuminated.
OFF: Front tally lamp stays off.
LOW: Front tally lamp dimly illuminated.
Parts and their Functions: Viewfinder
HD viewfinder
viewfinder
*3
)
*1
*2
PEAKING control
Used to adjust the outlines of the video image in the
viewfinder for easier focusing. This does not affect the
signal output from the camera.
CONTRAST control
Used to adjust the contrast of the video image in the
viewfinder. This does not affect the signal output from
the camera.
BRIGHT control
Used to adjust the brightness of the video image in the
viewfinder. This does not affect the signal output from
the camera.
Front tally lamp
This lamp is activated when the 3.TALLY switch is
positioned at [HIGH] or [LOW], and stays on during
recording. It also blinks in synchronisation with the REC
lamp in the viewfinder, and provides alerts.
Use the TALLY switch to change the intensity of the
lamp to ([HIGH] or [LOW]).
Back tally lamp
This lamp stays illuminated during shooting. It also
blinks in synchronisation with the REC lamp in the
viewfinder, and provides alerts.
When the lever is positioned at [OFF], the back tally
lamp is hidden.
Advertisement
Table of Contents
