Table of Contents
Advertisement
Assigning Functions to USER Buttons
The USER MAIN SW, USER1 SW , USER2 SW, SHOT
MARK SW (USER3 SW) and TEXT MEMO SW (USER4
SW) buttons can be assigned user-selected functions.
To select desired functions, use the menu items USER MAIN
SW, USER1 SW , USER2 SW, SHOT MARK SW (USER3
SW) and TEXT MEMO SW (USER4 SW). These options can
be found in the <USER SW> screen, which is accessible
from the CAM OPERATION page.
Selectable Functions
INH:
No function assigned.
S.GAIN:
S.GAIN function assigned. The AWB does not
function while the S.GAIN function is ON.
DS.GAIN:
DS.GAIN function assigned.
The DS.GAIN function only operates when
shooting in 59.94i and 50i. Also, SHUTTER
mode turns off when operating the DS.GAIN.
Image when the DS.GAIN function is turned
ON or OFF will not be continuous.
S.IRIS:
Super Iris function assigned.
This is useful for backlight compensation.
I.OVR:
Iris Override function assigned.
The target (reference) value in Auto Iris mode
must be changed.
To change the target value, put the unit into
this mode and press the JOG dial button. Turn
the JOG dial button clockwise or anti-
clockwise to change the value. The iris
indication section of the viewfinder screen
displays
,
"+"
"+ +"
When the desired value is displayed, stop
turning the JOG dial button. Then, press the
dial button to accept that value.
Note that once the mode is cancelled or the
power is turned off the original reference
value will be used again.
+:
+ +:
–:
– –:
: The reference value is used.
S.BLK:
Super Black function assigned.
This function lowers the black level to the
pedestal level or below.
B.GAMMA:
The BLACK GAMMA function is allocated.
This function highlights the black gradations.
Regardless of the value set in the BLACK
GAMMA item, the BLACK GAMMA is set to
,
–
, or
– –
.
"
"
"
"
Iris opens up by 0.5.
Iris opens up by 1.
Iris closes down by 0.5.
Iris closes down by 1.
Adjustments and Settings for Recording Assigning Functions to USER Buttons
"+3". You can select the BLACK GAMMA
menu option from either the <LOW
SETTING> screen, the <MID SETTING>
screen, or the <HIGH SETTING> screen of
the PAINT page.
D.ZOOM:
The digital zoom function is assigned.
This function zooms up the angle of view at 2/
3/4 vertical horizontal ratio.
ATW:
The automatic tracking white balance function
is assigned.
ATW LOCK: When you press while the ATW function is
operating, the white balance value is set.
When you press once again the ATW function
resumes operation.
Y GET:
Function of indicating the brightness level of
the center marker assigned.
DRS:
The function of the dynamic range stretcher is
assigned.
This function expands dynamic range by
compressing the image level of high intensity
components and extending the image level of
low intensity components.
The compression level is variable on the
<KNEE LEVEL> screen on the PAINT page.
Because the DRS function compresses the
image level of high intensity components and
extends the image level of low intensity
components, turning the DRS function ON/
OFF sometimes causes slight differences in
color.
When the DRS function is turned on, the Knee
function and the BLACK GAMMA function are
not available.
The function to turn on or off the assigned
focus assist indication.
When the ASSIST button is turned on, a
graph is displayed on the viewfinder and the
bottom right of the LCD monitor. Adjust the
focus ring on the lens so that the graph comes
further right.
The function to switch to the mode that allows
the JOG dial button to change the assigned
color temperature. It is useful for intentionally
changing the color temperature after adjusting
the white balance. To change the color
temperature, press the user button with this
assigned function, and then press the JOG
dial button. The color temperature indicated
on the viewfinder display is highlighted and
starts blinking, indicating that the color
temperature can be changed. While the
indication is blinking, the JOG dial button can
be turned to change the color temperature. At
this time, the value set for the position (PRST,
A, or B) to which the WHITE BAL switch is set
is also changed.
AUDIO CH1/3:
The function to switch the input signal of audio
Advertisement
Table of Contents
