Selection Of Video Output Signals - Panasonic AJ-HPX3100G Operating Instructions Manual

Selection of video output signals

The unit employs the SDI OUT connector and the MON OUT connector as connectors for outputting video signals.
Settings of signals output from SDI OUT connector
The type of output signal from the SDI OUT connector is in
accordance with the SYSTEM MODE item. Additionally, the
signal output from the SDI OUT connector is switched from
the SDI OUT MODE item.
The SYSTEM MODE can be selected from the <SYSTEM
MODE> screen on the SYSTEM SETTING page, and the
SDI OUT MODE can be selected from the <OUTPUT SEL>
screen on the SYSTEM SETTING page.
Variable
Item
range
MEM: During EE such as recording,
CAM: Camera images are output at
Set the characters to be superimposed on the signals output
from the SDI OUT connector in the OUTPUT ITEM and SDI
OUT CHAR items. Items can be selected from the
<OUTPUT SEL> screen on the SYSTEM SETTING page.
Variable
Item
range
Set the characters to be
superimposed on the output signals
from the VIDEO OUT connector.
MENU ONLY:
The menu screen is superimposed
only when the menu is accessed.
This normally displays nothing.
TC:
Time codes are superimposed
(when the menu is accessed, the
menu screen is superimposed.)
STATUS:
The characters that are the same
as the characters superimposed in
the viewfinder screen are
superimposed.
(When the menu is accessed, the
menu screen is superimposed.)
Select whether to superimpose
characters on the image output from
the SDI OUT connector.
OFF: Do not superimpose.
ON: Superimpose.
The content of the superimposed
characters is the same as that
superimposed on video output from
the MON OUT connector
Adjustments and Settings for Recording Selection of video output signals
Remarks
video images taken by the
camera are output. Meanwhile,
signals on the P2 card are
output during playback.
all times.
Remarks