Table of Contents
Advertisement
Resetting Menu Option Settings to Defaults
The menu settings can be reset to their defaults.
To reset the settings to their defaults, select the menu option
READ FACTORY DATA in the <INITIALIZE> screen, which
is accessible from the FILE page.
All settings will be reset to their defaults.
This operation does not delete the scene file, lens file, and
the information stored as the user data.
Lens file
The built-in memory of the unit stores eight sets of lens files.
On the SD memory card, eight titles for eight sets of lens
files in a table (total 64 sets) can be written.
The following data are recorded on the lens file.
How to provide lens files
Adjustment of white shading
For the white shading adjustment, refer to [Adjusting the
Lens White Shading] (page 112)
Adjustment of the flare
Using the menu operations, adjust the flare in the LENS R
FLARE item, the LENS G FLARE item and the LENS B
FLARE item. These menu items are found in the <LENS
FILE ADJ> screen on the MAINTENANCE page.
Example of the chart for flare adjustment
Title name
White shading correction value
Flare compensation value
RB gain offset correction value
Adjustment of gain offset
For correcting changes in white balance that may occur
when replacing the lens.
Mount the lens to memory the lens file on the
unit.
Shoot the grayscale chart with appropriate
lighting (2000 lx, 3200 K are preferable).
Set the WHITE BAL switch to the “A” position.
Adjust the lens aperture so that the white
window at the center of the grayscale chart is
about 80%.
Push the AUTO W/B BAL switch to “AWB” to
adjust the white balance automatically.
Measure the signal level of RGB by using the
waveform monitor (WFM).
Adjust the lens aperture so that the signal
level of Gch is the same signal level as the
one obtained in
above.
Set the LENS FILE ADJ MODE to ON.
Adjust the signal level of Rch to be the same
as Gch in the LENS R GAIN OFFSET item.
In the same way, adjust the signal level of Bch
to be the same as Gch in the LENS B GAIN
OFFSET item.
Adjustments and Settings for Recording Handling data
Advertisement
Table of Contents
