Formatting A P2 Card; Formatting Sd Memory Cards - Panasonic AJ-HPX3100G Operating Instructions Manual

Formatting a P2 Card

Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
Press the THUMBNAIL MENU button and
select OPERATION
thethumbnail menu.
When the screen shown below appears, select the
slot number of the P2 card you want to format and
press the SET button.
Select EXIT if formatting is not required.
The following screen appears. Use the cursor
buttons and the SET button to select YES.
The selected P2 card is formatted.
Check that no important data remains on a card before
formatting since data erased by formatting cannot be
recovered.
FORMAT from
Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview

Formatting SD memory cards

SD memory cards can also be formatted from the thumbnail
screen. With an SD memory card inserted into the camera-
recorder, perform the following operation:
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
Press the THUMBNAIL MENU button and
select OPERATION
thumbnail menu.
The following screen appears. Select "SD CARD".
Select "EXIT" if formatting is not required.
The following screen appears. Use the cursor
buttons and the SET button to select YES.
The SD memory card is formatted.
SD memory cards can also be formatted from the menu
screen.
[To format an SD memory card] (page 92).
Check that no important data remains on a card before
formatting since data erased by formatting cannot be
recovered.
FORMAT from the