Ricoh 2238c Operating Instructions Manual page 24

Preparations for Use as a Network Scanner
❖ ❖ ❖ ❖ Wait Time for Next Original(s): SADF
When dividing originals and scan-
ning them separately with the
ADF to form a single file, select [Set
Wait Time] or [Continuous Wait] for
the waiting status.
Note
2
❒ If [SADF] is specified when scan-
ning, this setting is valid.
❒ If [Set Wait Time] is selected, en-
ter the waiting time in seconds
(3-999) for placing additional
originals with the number keys.
Scanning will start automatical-
ly when additional originals are
placed within this time. You can
end scanning and begin sending
by pressing the { { { { #} } } } key within
this time. If the specified time
has passed, sending starts auto-
matically and you do not need
to press the { { { { #} } } } key.
❒ If [Continuous Wait] is selected,
the machine will wait for the ad-
ditional originals until the { { { { #} } } }
key is pressed. Scanning will
start when additional originals
are placed and the { { { { Start} } } } key is
pressed. You can end scanning
and begin sending by pressing
the { { { { #} } } } key.
❒ Even if originals are placed on
the exposure glass, the machine
will function as the settings.
However, every time originals
are placed, you must press the
{ { { { Start} } } } key to start scanning.
❒ If a paper jam occurs or any of the
following operation is performed
while the machine is waiting for
additional originals, the count-
down stops and the machine will
wait for additional originals until
the { { { { #} } } } key is pressed.
• Changing the settings such
as the scan settings
16
• Pressing the { { { { Interrupt} } } } key to
activate the copy mode
❖ ❖ ❖ ❖ Original Setting
Set the default for whether origi-
nals are one-sided or two-sided
and if two-sided, the relationship
between those sides. When the
originals are always the same, set
this for the default to make opera-
tion easier. You can select [1 Sided
Original], [2 Sided Orig.:T to T] (Top to
Top), or [2 Sided Orig.:T to B] (Top to
Bottom).
Reference
p.39 "Original Orientation and
Scan Area"
❖ ❖ ❖ ❖ Original Feed Type Priority
Multiple originals can be divided
and scanned separately using the
exposure glass or ADF to form a
single file. In this case, the waiting
time for placing additional origi-
nals to scan can be specified.
If [SADF] is selected, the [Wait Time
for Next Original(s): SADF] setting
will be valid when scanning.
If [Batch] is selected, scanning will
start when the additional originals
are placed and the { { { { Start} } } } key is
pressed regardless of the setting
for [Wait Time for Next Orig.: Exposure
Glass] or [Wait Time for Next Origi-
nal(s): SADF].
If [Off] is selected, the [Wait Time for
Next Orig.: Exposure Glass] setting is
valid when scanning.
Note
❒ The countdown for scanning
additional originals stops when
s c a n n i n g c o n d i t i o n s a r e
changed. The machine keeps
waiting for restarting the count-
down until the { { { { # } } } } key is
pressed.