Display Contents - Ricoh 2238c Operating Instructions Manual

10.
Operation switch
Press this switch to turn the machine on.
The power indicator lights up. To turn
the machine off, press this switch again.
Note
❒ This key is inactive while scanning or
setting scanner defaults.
11.
Function status indicators
• When lit green, the corresponding
function is active.
• When lit red, the corresponding func-
tion is interrupted. Press the respec-
t i v e k e y , a n d t h e n f o l l o w t h e
instructions that appear on the screen.

Display Contents

This section explains the normal screen configuration.
The display's contents differ depending on the function.
Note
❒ The Copy screen is set as the default screen when the machine is turned on.
You can change this setting in the System Settings. See General Settings Guide.
Using e-mail
Press the { { { { Scanner} } } } key to display the e-mail screen (when [E-mail/ Folder] has
been selected in [Destination List Display Priority 1] and [E-mail Address] has been se-
lected in [Destination List Display Priority 2]). If the Network TWAIN Scanner screen
appears, press [Exit].
Reference
For information about Destination List Display Priority, see p.19 "Destination
List Settings".
12.
Function keys
Press the { { { { Copy} } } } , { { { { Document Server} } } } , { { { { Fac-
simile} } } } , { { { { Printer} } } } , or { { { { Scanner} } } } key to acti-
vate the respective function. The display
content changes accordingly.
The indicator for the selected function
lights up.
13.
Number keys
Use to enter numeric values.
{ { { { #} } } } key (Enter key)
14.
Use to confirm the entered numeric val-
ue.
{ { { { Clear/Stop} } } } key
15.
• Clear: Clears an entered numeric val-
ue
• Stop: Stops scanning
{ { { { Start} } } } key
16.
Use to begin scanning, file storing, or de-
livery.
Control Panel
1
9