Administer The Basic Parameters - NEC 2400 Integration Manual

Switch Integration Device Administration

Administer the Basic Parameters

In Chapter 3, "Switch Integration Planning", you completed switch integration
planning worksheets and determined the values for each of the basic
parameters. If you did not complete the worksheets, turn to Chapter 3 and
complete them now before you proceed with the instructions in this chapter.
After you complete the worksheets in Chapter 3, continue with the instructions on
the next page to configure the basic parameters.
1. To access the basic parameters edit forms, press
keypad.
After you press the key, you see the MCI MAIN MENU as shown in the
following example:
NEC
2. To set up the basic parameters for the MCI data link, press
keypad to select the SETUP option.
After you press the key, you see the SETUP menu as shown in the
following example:
SETUP
3. Press
PARAMS edit forms as shown in the following example:
SETUP
0
4. Enter the number of analog voice mail ports from worksheet A that the SID
must support for the INTUITY System.
5. Press
form, the MSG DESK NUMBER form, as shown in the following example:
SETUP
8-2
Issue 2 December 1995
1-View
4-Setup
1-Params
4-Advanced
on the SID keypad to access the first in a series of eight
1
Number of Ports
to confirm the number and move to the next basic parameter edit
Msg Desk Number:
on the SID
FUNC
2-Utils 3-System
5-Logs
4
2-Ports 3-Clear
140
001
on the SID