Intuity System Required Hardware - NEC 2400 Integration Manual

Intuity System Required Hardware

Table 1-1 lists the hardware components required on the Intuity system for the
NEAX integration.
Table 1-1. Intuity System Hardware Components Required for the Integration
Component
MAP/5, MAP/40, or Hardware platform that operates the
MAP/100 Intuity system software
IVC6 cards Integrated Voice Processing (IVC6)
cards used for voice port connections.
May have a maximum of 11 cards.
Includes any of the following hardware:
885A adaptors and cables
25-ft. modular cords with 6-pin to 25-pin
adapters
Two high density cables, RJ21X, with a
356B adapter for T/R distribution
Multiport serial Equinox multiport card provides multiple
port card serial ports for adjunct component
connections. On the MAP/40 and MAP/
100, the COM ports are occupied by
other components and the Equinox card
must be used for the SID connection. On
the MAP/5, the COM1 port can be used
for the SID connection.
MAP5 only: For a COM1 connection on the MAP/5, an
RS-232 cable RS-232 cable, DB-25, is required to
(DB-25) connect the SID to the Intuity system.
The cable includes a 25-pin to 9-pin
adapter (DB-9).
Equinox For a connection to the Equinox multiport
connection only:
serial card, an RS-232 cable with a 6-pin
RS-232 cable with to 25-pin adapter is required.
6-pin to 25-pin
adapter
Description
System Configuration
AT&T Customer
Supplied Supplied
X
X
X
X
X
X
X
X
Issue 2 December 1995
1-7