Mac Clone; Lan - TP-Link TL-MR6400 User Manual

provides, please refer to the ISP. The various types of Internet connections that the router can
detect are as follows:
PPPoE - Connections which use PPPoE that requires a user name and password.

Dynamic IP - Connections which use dynamic IP address assignment.

Static IP - Connections which use static IP address assignment.

The router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses
one of these protocols, then you must configure your connection manually.

5.6.2 MAC Clone

Choose menu "Network → MAC Clone", and then you can configure the MAC address of the
WAN on the screen below, Figure 5-10:
Some ISPs require that you register the MAC Address of your adapter. Changes are rarely
needed here.
WAN MAC Address - This field displays the current MAC address of the WAN port. If

your ISP requires you to register the MAC address, please enter the correct MAC address
into this field in XX-XX-XX-XX-XX-XX format(X is any hexadecimal digit).
Your PC's MAC Address - This field displays the MAC address of the PC that is

managing the router. If the MAC address is required, you can click the Clone MAC
Address button and this MAC address will fill in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Click the Save button to save your settings.

Note:
Only the PC on your LAN can use the MAC Address Clone function.

5.6.3 LAN

Choose menu "Network → LAN", and then you can configure the IP parameters of the LAN on
the screen as below.
TL-MR6400
Figure 5-10 MAC Address Clone
-97-
300Mbps Wireless N 4G LTE Router