TP-Link Archer MR6400 Quick Installation Manual

Quick Installation Guide
Wireless 4G LTE Router
Images may differ from actual products.
©2020 TP-Link 7106509067 REV5.1.0
2. Verify the Hardware Connection
Check the following LEDs' status. If the Internet LED
to the internet successfully.
Power Internet Wi-Fi
On On On
Note: If the Internet LED does not turn on, please refer to Need Help? > Q2 on the back page.
For better internet connection, make sure 2 or 3 bars of the Signal Strength LED
are lit. Otherwise, try relocating the router to a spot that may receive a stronger mobile
network signal, such as near a window.
is on, your router is connected
1. Connect the Hardware
Power adapter
c. Connect the
power adapter
to the router.
3. Enjoy the Internet
Wired
Connect your computer to the router's LAN port via an Ethernet cable.
Wireless
a.
Find the SSID (network name) and wireless password printed on the label at the
bottom of the router.
Note: For a dual-band router, you can find two default SSIDs. Choose one to join the Wi-Fi.
b.
Click the network icon of your computer or go to Wi-Fi settings of your smart device,
and then select the SSID to join the network.
a. Install the antennas
and position them
upwards.
b. With the gold contacts
facing down, insert the
nano SIM card into the
Router
slot until you hear a
click.