Factory Defaults; Backup & Restore - TP-Link TL-MR6400 User Manual


Note:
The firmware version must correspond to the hardware. The upgrade process takes a few
moments and this device restarts automatically when the upgrade is complete. It is important to
keep power applied during the entire process. Loss of power during the upgrade could damage
this device.

4.18.5 Factory Defaults

Choose menu "System Tools → Factory Defaults", and you can restore the configurations of
the router to factory defaults on the following screen.
Click the Restore button to reset all configuration settings to their default values.
The default User Name: admin
•
The default Password: admin
•
The default IP Address: 192.168.1.1
•
The default Subnet Mask: 255.255.255.0
•

Note:
All changed settings will be lost when defaults are restored.
4.18.6 Backup & Restore
Choose menu "System Tools → Backup & Restore", you can save the current configuration
of the router as a backup file and restore the configuration via a backup file as shown in Figure
4-83.
Click the Backup button to save all configuration settings to your local computer as a file.

To restore this device's configuration, follow these instructions:

Click the Choose File button to find the configuration file which you want to restore.
1)
Click the Restore button to update the configuration with the file whose path is the one
2)
you have input or selected in the blank.
TL-MR6400
Figure 4-82 Restore Factory Default
Figure 4-83 Backup & Restore Configuration
300Mbps Wireless N 4G LTE Router
-80-