Wireless Security - TP-Link TL-MR6400 User Manual

SSID (to be bridged) - The SSID of the AP your Router is going to connect to as a

client. You can also use the survey function to select the SSID to join.
BSSID (to be bridged) - The BSSID of the AP your Router is going to connect to as a

client. You can also use the survey function to select the BSSID to join.
Survey - Click this button, you can search the AP which runs in the current channel.

WDS Mode - This field determines which WDS Mode will be used. It is not necessary

to change the WDS Mode unless you notice network communication problems with
root AP. If you select Auto, then Router will choose the appropriate WDS Mode
automatically.
Key type - This option should be chosen according to the AP's security configuration.

It is recommended that the security type is the same as your AP's security type
WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP

(HEX).It indicates the index of the WEP key.
Auth Type - This option should be chosen if the key type is WEP (ASCII) or WEP

(HEX).It indicates the authorization type of the Root AP.
Password - If the AP your Router is going to connect needs password, you need to

fill the password in this blank.

4.8.2 Wireless Security

Choose menu "Wireless → Wireless Security", and then you can configure the security
settings of your wireless network.
TL-MR6400 300Mbps Wireless N 4G LTE Router
-33-