Chapter 3. Quick Installation Guide; 4G Router Mode - TP-Link TL-MR6400 User Manual

Chapter 3. Quick Installation Guide

This chapter will show you how to configure the basic functions of your TL-MR6400 using
Quick Setup within minutes.
3.1 3G/4G Router Mode
1. Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. If
you need instructions as to how to do this, please refer to
2. Connect your computer to the router (wired or wireless).
Wired: Connect your computer to the router's LAN port via an Ethernet cable.
Wireless: Connect wirelessly by using the SSID (network name) and Wireless Password
printed on the product label at the bottom of the router.
3. To access the configuration utility, open a web-browser and type the default address
http://tplinkmodem.net
4. After a moment, a login window will appear, similar to the Figure 3-2. Enter admin for the
User Name and Password, both in lower case letters. Then click the Login button or press
the Enter key.

Note:
If the above screen does not pop-up, it means that your Web-browser has been set to a proxy.
Go to Tools > Internet Options > Connections > LAN Settings, in the screen that appears,
cancel the Using Proxy checkbox, and click OK to finish it.
TL-MR6400
in the address field of the browser.
Figure 3-1 Login the router
Figure 3-2 Login Windows
-9-
300Mbps Wireless N 4G LTE Router
Appendix B: Configuring the PC.