Minolta Pi3505e Service Manual page 60

Minolta printer controller service manual
Hide thumbs Also See for Pi3505e:
Table of Contents

Advertisement

Num-
Symptom
ber
31
The "Cover
If two or more copies
Mode" and
are specified, if the
"OHP Inter-
paper source is set
leaving"
to the 1st through
functions
4th paper drawers,
cannot be
or if double-sided
specified.
printing, booklet
printing, distribution
number printing,
reprinting, stapling or
hole punching are
specified, the "OHP
Interleaving" func-
tion cannot be
selected.
If booklet binding is
selected, the "Cover
Mode" function can-
not be selected.
32
The size of
The paper drawer for
the inter-
the interleaves or
leaves or
cover pages is not
cover pages
specified.
is not the
same.
33
Distribution
If sorting is not spec-
numbering
ified, distribution
cannot be
numbering cannot
specified.
be selected.
34
Distribution
After specifying the
numbering is
distribution number,
not per-
sorting was can-
formed as
celled.
specified.
35
The print
Paper with the cor-
result is dif-
rect size and orienta-
ferent from
tion is not loaded.
the pre-
viewed
image.
Possible Cause
Check if multiple
copies or the
paper source are
selected, if the
"Booklet Creation"
setting or the "Dis-
tribution #" or
"OHP Interleav-
ing" function is
selected, and if
reprinting, sta-
pling or hole
punching are
selected.
Check if the "Book-
let Creation" set-
ting is selected.
Specify the paper
drawer loaded with
paper for the inter-
leaves and cover
pages with the
same orientation
and size as the
document.
Check that sorting
is selected.
Check that sorting
is specified.
Depending on the
selected settings,
not all distribution
number may be
printed.
Check the speci-
fied paper size and
orientation in the
application and
printe's Properties
dialog box.
T-11
Remedy
Description
When the "Distribution #"
function was specified,
sorting was specified.
However, if sorting was
later cancelled, the "Dis-
tribution #" function will
also be cancelled.
Since the paper size and
orientation settings speci-
fied in the application
have priority over the set-
tings in the printer's Prop-
erties dialog box, the print
result may be different
from the previewed
image.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pi3505e/ps

Table of Contents